Details
From the brand
As a leading provider of smart home solutions, Aqara excels in delivering a wide array of award-winning, user-friendly smart home products and platform solutions tailored for your home. We proudly serve over 12 million customers in more than 170 countries and territories. Our products are designed to offer convenience, security, and energy efficiency, making your home smarter, more sustainable, and adaptive to your evolving needs.
Aqara Smart Lock
Aqara Cameras & Hubs
Aqara Sensors
Aqara Controllers
[Notes]An Aqara Hub is required and sold separately.(NOTE:Not support hubs from other brands.) Requires a secured 2.4 gigahertz Wi-Fi network connection for Hub M2/ M1S/ E1/M1S Gen2 and Camera Hub G2H Pro/ G2H, and 2.4/ 5 GHz Wi-Fi for Camera Hub G3.(Wired connection via Ethernet RJ45 for Hub M2 is also supported)
[Proximity]For a sturdy connection, ensure that the Aqara Door and Window Sensor is within 400 inches of the Aqara Zigbee hub, and the hub is within the same range from the Wi-Fi router. Additionally, make sure the hub and the router are on the same local area network (LAN).
[Unauthorized Entry Detection & Home Automation] The Zigbee Door Sensor alerts your phone and triggers the Aqara Hub’s local alarm upon unexpected door/window openings. It also controls other Aqara devices based on door/window status. Conveniently check your door or window, kids room and anywhere you want to be notified.
[0.86 Inch Wide Gap Allowed]The Aqara Door and Window Sensor works with most types of doors, windows, and other fixtures with similar mechanism, such as drawers, cabinets, and more.(Note: Please ensure that the surface where you plan to stick the Aqara Zigbee Door and Window Sensor is flat and easily adhesive, and the allowed gap between the door is up to 0.86 inch.) The main sensor unit dimension:1.61*0.87*0.43 inch, the magnet dimension:0.79*0.39*0.39 inch.
[Hands-Free Voice Control]Compatible with Apple HomeKit, Alexa for a hands-free experience.- no need to go downstairs or pick up your phone again. You’ll always know whether your home door is opening or closing (The Aqara Door and Window Sensor is not compatible with SmartThings currently.)
Maurice Bennett –
Works Perfectly – Ideal for Mailbox Notifications!
⭐️⭐️⭐️⭐️⭐️ Works Perfectly – Ideal for Mailbox Notifications!The Aqara Zigbee contact sensor exceeded my expectations. Home Assistant recognized it almost instantly—within less than a minute of pairing. It’s extremely responsive and reliable. I originally purchased it for its compact size, as I needed a small Zigbee sensor to fit inside my mailbox and notify me when mail is delivered. It’s absolutely perfect for that purpose. An added bonus is the built-in temperature sensor, which I didn’t realize I needed but now really appreciate. Overall, I highly recommend this sensor for anyone looking for a compact, responsive solution that integrates easily with Home Assistant.
Curtis –
Great door and windows sensors
I am using these as Zigbee in Home Assistant. Extremely easy to setup. They are actually reliable. These replaced the sonoff DS01 that would not stay connected. I will buy more as I expand my system.
GWL –
Perfect!
I’m using these to check when my garage doors are open and closed. Super easy to install and set up.
Wiley –
It has two minor but annoying issues . . .
I’ve been using one for two years, and it (almost) works fine. But:1) The output bounces a lot. I attached it to a gate and tried to program it to run one automation when the gate opens and another when the gate closes. However, when the gate opens, rather then receiving a single ‘open’ message, I received ‘open’, ‘closed’ . . . ‘open’, ‘closed’, ‘open’ messages over a fraction of a second, causing both automations to run simultaneously. Same when I close the gate.2) It occasionally disappears from the ZigBee network, for no known reason. I then need to remove it from the gate, put it back into pairing mode, and have the ZigBee coordinator re-attach to it. It wouldn’t be that big a deal except for the fact that it is embedded in the gate and is difficult to remove.
Zach Kimrey –
The best and smallest contact sensors on the market!
Anything from Aqara is great. I have these on doors, our mailbox and even our washing machine lid. They are super reliable and never fail. Pair directly to Home Assistant and run any automation. Battery life is long enough that I cant keep up with how long they last
dxmnkd316 –
Very good Zigbee door/window sensor
There’s a lot to like about these little sensors, but a few things to note as well.First, I bought one of these to test before committing to putting them on all of my windows and doors. Worked great. I have now purchased several more sensors.I’ve seen recommendations that you don’t pair your devices with the receiver until you have it near where the final install is located. It was explained that zigbee networks kind of self-sort and adjust power, channels, etc. based on the network signal. I have no idea if this is true, just passing it on.The Good:– I connected these to Home Assistant via a Sonoff Zigbee USB receiver and ZHA integration. Home Assistant picked it up almost immediately upon putting it into pairing mode.– The open/close signal is picked up within a fraction of a second. Very sensitive.– There’s a basic temperature sensor in the device that is reported back to HA.– The devices report back LQI for your network. Kind of handy to know.– However small you think these things are, you’re wrong. They’re smaller. I wouldn’t call them non-descript, but they were significantly smaller than the devices they replaced. A quarter of the size. You can find the dimensions on the product page.The Less Than Ideal:– Sometimes when I close my windows, the window “bounces” a little. Just enough for the sensor to “close” and then immediately “open” again even though the window is closed and properly seated. It’s kind of annoying since the only way to see if this happened is to open the HA app and check the status. Maybe I should just pulse the lights in the room when it’s been closed for 5 seconds. Anyways…– There is only a small fraction of the information I would have preferred transmitted– RSSI is not reported to HA. Not sure if this is a HA thing, Sonoff thing, ZHA thing, or Aqara thing.– The temperature isn’t very useful. It’s the temperature of your door frame basically. I’m not entirely sure about the accuracy, but I have my doubts.The Ugly:– The batteries that are shipped all show up as about 75% upon installation. Really annoying. But not a dealbreaker I suppose.The Undetermined:– I’ve had these installed for 2-3 months. For the first month, several batteries went from “100%” to 77.5%. All have basically stayed at 77.5% for the entirety of the second and third months. Another went from “100%” to 55% in the first month. Another is at 65% after two months. There’s no correlation between amount of use and battery life as of yet. My longest-lasting and first installed battery is also the battery with the highest amount of life left.–Update 10-28-2024: I have yet to replace the batteries in a single one of these. I have had three installed since May 2023, another three since July 2023, and couple of singles installed since. All are hovering between 50% and 70% battery remaining and have been flat since roughly November 2023.Bottom Line:I’d recommend them if you’re looking for non-wifi, immediate signal, zigbee door/window sensors that are small. They tick just about every box you could need.
ZeroPressure –
These work. No complaints.
A bit finnicky to setup initially, but I have them on all my doors now, and they seem to work perfectly well with my SLZB-06M coordinator, without any Agara hubs.
Amazon カスタマー –
小型で使いやすい。反応も速い
Onur Altan CAN –
Apple HomeKit ile beraber kullanıyorum, çok basit ve pratik kurulumu var. Daha once bir kaç tane vardı, tekrar eksik yerleri tamamladım. Fiyat performans ürünü benim için. Tavsiye 👍🏼👍🏼Aqara hub gerekiyor.
Himesama –
Acheté en octobre 2024 pour 44,79€, j’ai équipé mon logement de ces petits espions d’Aqara : porte-fenêtres, fenêtres ou porte d’entrée, tout y est passé. Autant vous dire que mon chez moi est maintenant plus surveillée que Fort Knox ! 😄L’installation ? Un jeu d’enfant ! Les autocollants double face fournis font le job parfaitement. Si vos ouvrants sont assez épais, vous pouvez même poser le plus petit élément sur la tranche. La détection se fait de face ou à 90°, avec une distance max de 2 cm.Côté réactivité, ces petits bijoux sont plus rapides que l’éclair ⚡. Ouverture, fermeture, tout est détecté en un clin d’œil. Fiabilité 100%, pas de faux positifs ni de ratés. C’est du solide !Maintenant, parlons autonomie. Les piles d’origine semblent s’épuiser assez rapidement, avec une baisse de 10 % en moins d’un mois. Bien que cela puisse être un problème avec les piles fournies, il est possible que d’autres modèles sur le marché offrent une meilleure autonomie. Pensez donc à prévoir des piles de qualité lors du prochain changement.Pour l’intégration, c’est un sans-faute. Je les ai branchés sur mon setup de pro : passerelle Zigbee 3 Sonoff, Raspberry Pi 3B, et Home Assistant. Ça fonctionne comme sur des roulettes !Les possibilités d’automatisation sont infinies. Vous pouvez transformer votre maison en véritable assistant personnel : rappels d’ouverture de porte, coupure du chauffage quand une fenêtre est ouverte (adieu les factures astronomiques !), alertes si une porte ou fenêtre est ouverte quand vous partez… C’est comme avoir un majordome invisible ! 🎩Niveau design, ils sont simples, élégants, avec des tranches nettes et des coins arrondis. Sur des fenêtres en PVC blanc, c’est discret !En conclusion, l’Aqara Détecteur d’Ouverture, c’est le Batman de vos fenêtres : efficace, discret, et toujours là quand il faut. Certes, il a un petit problème d’appétit côté piles, mais hey, même les superhéros ont besoin d’énergie ! Pour les amateurs de domotique ou ceux qui veulent simplement savoir si leur ado fugue la nuit, c’est un must-have.
Hesham AlAdel –
Does north it even if it given for free
Cezary280 –
Nie mam zarzutów. Łatwo się paruje z aplikacją i HUBem, ma dużą tolerancję jeśli ma się grube ramy okien. Jestem zadowolony.